GXR P10, higher ISO issues

[burpster]

Hi all P10 and GXR users,

i just want to check with u all, when u go to high ISO like 1.2k and above,
does the color of your photo look weird? or is there some setting to adjust to off set it??

for example, this was in an aquarium, where flash was prohibited, so i was force to go ISO 3200, with shutter priority so i can increase exposure some more...

 

[odklizec]

Hi burpster and welcome to the board! I'm afraid, low-light photography and under the artificial light, is always a challenge for right WB settings. It's especially a problem with the small sensor (and therefore noisy) cameras like the P10, where noise and noise reduction makes things worse.

My suggestion is to use RAW+JPEG option and if the JPEG colors turn wrong, load the DNG into a RAW editor with good color noise reduction tool and edit the photo according your taste. Hope this helps?

See for example these posts, where you can see how good high ISO shots (in terms of details and color reproduction) you can get from the P10 DNG files using a capable RAW editor...
viewtopic.php?p=21877#p21877
viewtopic.php?f=60&t=5822&p=27517

 

[burpster]

hi pavel,
thx for the feedback, ok now its time to check out SP5
seems like a powerful editor =)